Door stop to install on your wall. This type of door stopper is installed at the level of the door handle to protect your walls and doors from any serious knocks and/or impacts. Made of matt satin brass, we achieve a golden colour to create a decorative space in your home.
Install your stopper in the most convenient way for you: on the one hand, with the 3M adhesive pad, ideal for smooth walls or walls without special paints. On the other hand, with a screw, removing the rubber from the head and screwing it to the wall.
Evi Herrajes manufactures with the best materials, to obtain durable and high quality tops. This is an elegant and decorative stopper. Available only in brass and finishes to create a decorative space in your home.
Available finishes:
– Matt satin brass and silicone rubber in black colour.
– Matt satin brass and white silicone rubber.
The dimensions of the doorstop are as follows: 28 millimeters in diameter and 17 millimeters in length.
Install your doorstop:
- Choose the installation site*.
- Clean the surface with a damp cloth, making sure that no residue is left.
- Without removing the protective film of the adhesive, slightly heat the adhesive pad of the doorstop with a hairdryer to increase its adhesion capacity.
- Remove the protective film without touching the adhesive with your hands, as it could lose its adhesion properties.
- Install the doorstop in the desired location and press firmly for 1 minute**.
- After installation, wait 24 hours for the adhesive to set and allow the door stop to perform its function properly.
*We do not recommend installing the adhesive stops on rough walls or walls finished with special paints, in this case we recommend screw installation.
**In case of screw fixing, follow the first two steps and drill the hole and then screw the stop. In this way it could be used immediately after installation.
